Product introduction:1. Anywhere with an Ethernet port can be accessed, with a dual-port hub (HUB), which can accept the access and control of servers and other IP network devices.2. Netwo
Product introduction:
1. Anywhere with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
2. Network fault self-diagnosis, network and service status display; Compatible with SIP protocol, Onvif protocol.
3. With two lines of input / output, the line direction can be configured by software, with a direction indication at the line interface;
4. Can convert digital audio signals on the network in o analog audio signals, with dual channel RCA output and mixed sound Phoenix terminal balanced output.
5. The output can be connected to a digital power amplifier, can be connected to a common traditional analog power amplifier, or can be output as a sound source through a two-channel RCA;
6. The analog audio signal can be converted in o digital signal and transmitted to the network, with dual-channel acquisition function.
7. Strong cut function, when the fire signal starts, it will automatically output 24V electric signal and three-wire strong cut electric signal to open the volume controller, no need to add equipment;
8. Unique power amplifier detection function, the network can monitor the status of power amplifier in real time;
9. With DC24V backup power interface;
10. With the power amplifier backup function, The system can realize one standby multi-master automatic switching;
11. Working signal light indication, local volume control, color display screen;
12. Network parameters can be configured locally.
Specification:
Model No | IP-9619AO III |
Network interface | Standard RJ45, 10M/100M network port, network port comes with upgrade function |
Support protocols | TCP,UDP,IGMP,ICMP,ARP, compatible with SIP protocol, Onvif protocol. |
Audio format | PCM（Uncompressed format）ADPCM,MP3 |
Channel | Number of channels: 2 channels, input or output is self-set. |
Network delay | File playback: less than 50ms, real-time speech: less than 100ms |
Transmission rate | 10/100Mbps |
Audio mode | Network packet |
Frequency response | 20HZ~16KHZ |
THD | ≤0.3% |
SNR | ＞75db |
Line input level | 1.4V RCA |
Line output level | 2.8V RCA |
Strong cut output | DC24V/2A three-wire system |
Working temperature | -20℃~+60℃ |
Power consumption | ≤35W（there is no load） |
Power supply | AC220V/50Hz AC110V/60Hz DC24V reserve power supply |
Dimensions | 482（W）×44（H）×360（D）mm |
Product introduction:
1. Anywhere with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
2. Network fault self-diagnosis, network and service status display; Compatible with SIP protocol, Onvif protocol.
3. With two lines of input / output, the line direction can be configured by software, with a direction indication at the line interface;
4. Can convert digital audio signals on the network in o analog audio signals, with dual channel RCA output and mixed sound Phoenix terminal balanced output.
5. The output can be connected to a digital power amplifier, can be connected to a common traditional analog power amplifier, or can be output as a sound source through a two-channel RCA;
6. The analog audio signal can be converted in o digital signal and transmitted to the network, with dual-channel acquisition function.
7. Strong cut function, when the fire signal starts, it will automatically output 24V electric signal and three-wire strong cut electric signal to open the volume controller, no need to add equipment;
8. Unique power amplifier detection function, the network can monitor the status of power amplifier in real time;
9. With DC24V backup power interface;
10. With the power amplifier backup function, The system can realize one standby multi-master automatic switching;
11. Working signal light indication, local volume control, color display screen;
12. Network parameters can be configured locally.
Specification:
Model No:IP-9619AO III
Network interface:Standard RJ45, 10M/100M network port, network port comes with upgrade function
Support protocols:TCP,UDP,IGMP,ICMP,ARP
Audio format:PCM（Uncompressed format）ADPCM,MP3
Channel:Number of channels: 2 channels, input or output is self-set.
Network delay:File playback: less than 50ms, real-time speech: less than 100ms
Transmission rate:10/100Mbps
Audio mode:Network packet
Frequency response:20HZ~16KHZ
THD:≤0.3%
SNR:＞75db
Line input level:1.4V RCA
Line output level:2.8V RCA
Strong cut output:DC24V/2A three-wire system
Working temperature:-20℃~+60℃
Power consumption:≤35W（there is no load）
Power supply:AC220V/50Hz AC110V/60Hz DC24V reserve power supply
Dimensions:482（W）×44（H）×360（D）mm
Downloads: Manual (English) Manual (Chinese) Spec sheet (English) CAD drawing
