Product Description:1. Any place with an Ethernet port can be accessed, and access and control of servers and other IP network devices can be accepted.2. Network fault self-diagnosis, netw
Product Description:
1. Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
2. Network fault self-diagnosis, network and service status display;
3. Comes with dual network ports; Compatible with SIP protocol, Onvif protocol.
4. With two line inputs, two microphone inputs;
5. Can convert digital audio signals on the network into analog audio signals;
6. 2-channel 600W independent power amplifier;
7. Strong cut function, when the fire signal starts, it will automatically output 24V electric signal and three-wire strong cut electric signal to open the volume controller, no need to add equipment;
8. With power amplifier detection function, the network can monitor the status of power amplifier in real time;
9. With the power amplifier backup function, the system can realize one standby multi-master automatic switching;
10. Working signal light indication, local volume control, color display screen;
11.Network parameters can be configured locally.
Specification
Model | IP-2150AP III IP-2300AP III IP-2450AP III IP-2600AP III |
Network interface | Standard RJ45, 10M/100M dual network port, network port comes with upgrade function |
Support protocols | TCP,UDP,IGMP,ICMP,ARP, compatible with SIP protocol, Onvif protocol. |
Audio format | PCM (uncompressed format), ADPCM, MP3 |
Number of channels | 2-CH line input, 2-CH local microphone input, 2-CH network input |
Standby | No signal 3 minutes automatic standby |
Restart recovery time of power and network disconnection | <1s |
Network delay | File playback: less than 50ms, real-time speech: less than 100ms |
Transmission rate | 10/100Mbps |
Audio mode | Network data packet |
Frequency response | 20HZ~16KHZ |
THD | ≤0.3% |
SNR | >75db |
Line input level | 1.4V RCA |
Line output level | 2.8V RCA |
Strong cut output | DC24V/2A |
Operating temperature | -20℃～+60℃ |
Working humidity | 10%～90% |
Amplifier power | 2*150W 2*300W 2*450W 2*600W |
Power consumption | ≤40W (without load) |
Input power supply | AC220V/50Hz AC110V/60Hz |
Dimensions | 482(W) × 44(H) × 360(D)(mm) |
Product Description:
1. Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
2. Network fault self-diagnosis, network and service status display;
3. Comes with dual network ports; Compatible with SIP protocol, Onvif protocol.
4. With two line inputs, two microphone inputs;
5. Can convert digital audio signals on the network into analog audio signals;
6. 2-channel 600W independent power amplifier;
7. Strong cut function, when the fire signal starts, it will automatically output 24V electric signal and three-wire strong cut electric signal to open the volume controller, no need to add equipment;
8. With power amplifier detection function, the network can monitor the status of power amplifier in real time;
9. With the power amplifier backup function, the system can realize one standby multi-master automatic switching;
10. Working signal light indication, local volume control, color display screen;
11.Network parameters can be configured locally.
Specification
Model:IP-2150AP III/ IP-2300AP III / IP-2450AP III / IP-2600AP III
Network interface:Standard RJ45, 10M/100M dual network port, network port comes with upgrade function
Support protocols:TCP,UDP,IGMP,ICMP,ARP
Audio format:PCM (uncompressed format), ADPCM, MP3
Number of channels:2-CH line input, 2-CH local microphone input, 2-CH network input
Standby:No signal 3 minutes automatic standby
Restart recovery time of power and network disconnection:<1s
Network delay:File playback: less than 50ms, real-time speech: less than 100ms
Transmission rate:10/100Mbps
Audio mode:Network data packet
Frequency response:20HZ~16KHZ
THD:≤0.3%
SNR:>75db
Line input level:1.4V RCA
Line output level:2.8V RCA
Strong cut output:DC24V/2A
Operating temperature:-20℃～+60℃
Working humidity:10%～90%
Amplifier power:2*150W / 2*300W / 2*450W / 2*600W
Power consumption:≤40W (without load)
Input power supply:AC220V/50Hz AC110V/60Hz
Dimensions:482(W) × 44(H) × 360(D)(mm)
Downloads: Manual (English) Manual (Chinese) Spec sheet (English) CAD drawing
